|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-26-2010, 03:43 PM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 9
|
Anyone have a 03 48v Club Car with dump bed
anyone have an 03 cc with a utility bed PLEASE send me picks of how it mounts to the seat back and rear bumper and roof rails i have one that is disassembled and have spent countless hours trying to figure out the logistics thanks in advance
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-26-2010, 04:26 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Anyone have a 03 48v Club Car with dump bed
Never seen a "Dump" bed for a golf car... Only for a Carryall Utility Vehicle.
|
08-26-2010, 07:53 PM | #3 |
Gone Wild
Join Date: Jan 2009
Location: south carolina
Posts: 160
|
Re: Anyone have a 03 48v Club Car with dump bed
I have a mesh cargo basket on an 06, but it does not dump; I agree with T-Dog but then again I have never seen a Lepracan either! Good Luck!
|
08-26-2010, 08:59 PM | #4 |
Not Yet Wild
Join Date: May 2010
Posts: 9
|
Re: Anyone have a 03 48v Club Car with dump bed
my bad its not dump bed just alum utitity bed
|
08-26-2010, 09:00 PM | #5 |
Not Yet Wild
Join Date: May 2010
Posts: 9
|
Re: Anyone have a 03 48v Club Car with dump bed
|
08-26-2010, 09:05 PM | #6 |
Not Yet Wild
Join Date: May 2010
Posts: 9
|
Re: Anyone have a 03 48v Club Car with dump bed
|
08-26-2010, 09:06 PM | #7 |
Not Yet Wild
Join Date: May 2010
Posts: 9
|
Re: Anyone have a 03 48v Club Car with dump bed
my bad its not dump bed just alum utitity bed
|
08-27-2010, 09:02 AM | #8 |
Gone Wild
Join Date: Jan 2009
Location: south carolina
Posts: 160
|
Re: Anyone have a 03 48v Club Car with dump bed
Don't have any pictures but the basket I have came new seat brackets that replace factory ones; the supports are made into these and the rear supports bolt in the rear bumper where the philips head bolts are on each end. The top supports then bolt to the side of the basket and there should be pre-drilled holes in the supports the box sits on but you may have to drill another hole depending on cart. Hope this helps. Good Luck!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'87 EZ GO: Keep or dump?! | Gas EZGO | |||
Was someone looking for a dump bed for an EZ GO ? | Golf Carts and Parts | |||
Dump Box Jacobsen EZ GO | Golf Carts and Parts | |||
My g16 with alum dump bed | Lifted Golf Carts | |||
dump bed | Design Center |