|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-27-2010, 12:07 AM | #1 |
Getting Wild
Join Date: Feb 2010
Location: Arizona
Posts: 132
|
Have a 91 txt motor out and taken apart
Now I have a few questions. I took my engine out and found the blower housing is held together with zip ties, not one bolt! What size bolts do I need for this? Also I figure while it is out I will change the fuel pump, fuel lines and carberator. Do I need any special type of fuel line for this? Can I get a new fuel filter at napa?
Thanks, Scott 91 Robin engine 244 cc in an Ez Go Textron |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-27-2010, 08:16 AM | #2 |
Gone Wild
Join Date: Aug 2008
Location: Walled Lake MI
Posts: 332
|
Re: Have a 91 txt motor out and taken apart
The bolts are
BOLT, FLANGED, M6 X 1 X 18MM and the one bolt for the ground wire is 23mm Rubber fuel line is OK & the filters at lawn & garden shops work OK for less money than NAPA filters Just get the right size for the fuel line |
11-03-2010, 11:43 AM | #3 |
Getting Wild
Join Date: Feb 2010
Location: Arizona
Posts: 132
|
Re: Have a 91 txt motor out and taken apart
Thanks for the reply, thats a huge help.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1978 Harley Motor swap to a CRF 450cc motor. pics inside.. gearing help???/ | Gas Harley Davidson | |||
Replacing original motor with a GE motor??? | Electric Club Car | |||
GE Beast motor VS. D&D Torque motor | Electric EZGO | |||
My electric motor died i need help with what to do with installing a gas motor !!!! | Electric Club Car | |||
Converting from G1 motor to V Twin Motor | Gas Yamaha |