11-07-2010, 10:32 AM | #1 |
Getting Wild
Join Date: Oct 2010
Posts: 86
|
Jet removal
I need to get the main jet out of my 02 txt to clean it but the last guy who did that over tightend the jet and he striped part of the head off. I try using a screw driver but no luck. Any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-07-2010, 10:51 AM | #2 |
Not Yet Wild
Join Date: Oct 2010
Posts: 40
|
Re: Jet removal
if you have a small cutting wheel for a dremel tool you could cut a good slot in it to try to get a better grip with a screw driver. make sure you have the best groove you can make the first time though. once you screw that up its kind of hard to recover. vise grips may work but your better off trying the slot. make sure to clean real good to get any shavings out.
|
11-07-2010, 10:57 AM | #3 |
Getting Wild
Join Date: Oct 2010
Posts: 86
|
Re: Jet removal
The main jet is inside the tube between the float.
|
11-07-2010, 02:48 PM | #4 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,217
|
Re: Jet removal
You may be able to bubble clean the carb and not have to remove it.
|
11-07-2010, 04:43 PM | #5 |
Not Yet Wild
Join Date: Oct 2010
Posts: 40
|
Re: Jet removal
|
11-07-2010, 09:04 PM | #6 |
Getting Wild
Join Date: Oct 2010
Posts: 86
|
Re: Jet removal
Also, does the fuel filter have to be filled with fuel or does it only need to be 7 drops?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
79 EZ-GO Armature Removal | Gas EZGO | |||
EZ GO body removal help | Gas EZGO | |||
Overspray removal? | Body and Paint | |||
99 EZ GO clutch removal | Gas EZGO | |||
Tie Rod Removal | Lifted Golf Carts |