|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-22-2011, 02:36 PM | #11 |
Gone Wild
Join Date: Feb 2011
Location: Chesapeake, Va.
Posts: 367
|
Re: 89 EZGO goes only in high speed !HELP!
You have a resistor coil cart.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-22-2011, 02:58 PM | #12 |
Gone Wild
Join Date: Feb 2011
Location: Chesapeake, Va.
Posts: 367
|
Re: 89 EZGO goes only in high speed !HELP!
That box with the four wires going to it, are your coils, make sure none of them are touching and not broken. The piece in front of the box is your wiper board, make sure none of the contacts are burned.
|
07-23-2011, 11:23 PM | #13 |
Not Yet Wild
Join Date: Jul 2011
Location: Topeka, Kansas
Posts: 16
|
Re: 89 EZGO goes only in high speed !HELP!
Thanks for the heads up on those resistors. I took apart the housing which was a lot of work thanks to some rusted bolts and sure enough two of the resistors were bad. Ordered a new assembly today. I knew this cart would need some work but I wasn't quite prepared for this. My wife thinks it's a money pit, but I'm having fun despite the added expense. It looks as if the cables to the resistors probably need to be replaced as well. Does anyone know where I can get the appropriate gauge wire with leads as the assembly I ordered did not include them? I appreciate everyone's help.
|
07-24-2011, 06:35 AM | #14 |
Gone Wild
Join Date: Feb 2011
Location: Chesapeake, Va.
Posts: 367
|
Re: 89 EZGO goes only in high speed !HELP!
check with scottyb for the wires, or one of our other sponsors. It think scotty has a sale going on now.
|
07-24-2011, 03:30 PM | #15 |
Not Yet Wild
Join Date: Jul 2011
Location: Topeka, Kansas
Posts: 16
|
Re: 89 EZGO goes only in high speed !HELP!
I've been looking for cables and not sure which gauge to use. The resistor wires are gauged at 9 for first speed, 7 for second speed, and 5 for third speed. I'm having trouble finding those specific gauges. Is it okay to use a 4gauge wire for all of the resistors or will that overload the resistors? I noticed a lot of carts are using 4 gauge for all of their connections.
|
07-24-2011, 06:37 PM | #16 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 89 EZGO goes only in high speed !HELP!
Use 4 guage wire throughout, you will not have any problems doing so.
Also, Scotty has just designed a new conversion kit for those older resistor carts to update them to solid state, you may want to consider that option as well..... |
07-30-2011, 02:19 PM | #17 |
Not Yet Wild
Join Date: Jul 2011
Location: Topeka, Kansas
Posts: 16
|
Re: 89 EZGO goes only in high speed !HELP!
Ok. Got all of my parts in and started re-assembling everything and got a lot of sparks when connecting cables! I have the negative wire on battery unhooked and not sure why I'm getting current. Is there a specfic order in wiring that I should know about?
|
07-30-2011, 02:27 PM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 89 EZGO goes only in high speed !HELP!
This is the diagram for your cart. Hope it helps
|
07-30-2011, 02:37 PM | #19 |
Not Yet Wild
Join Date: Jul 2011
Location: Topeka, Kansas
Posts: 16
|
Re: 89 EZGO goes only in high speed !HELP!
Thanks Scotty, that definitely helps, but I'm still not sure why I would be getting a current if my batteries are disconnected. I'm a little hesitant to connect everything as (1) I don't want to end up in the ER (2) I don't want to ruin any new parts. What battery cable should be disconnected? I thought the negative.
|
07-30-2011, 04:04 PM | #20 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 89 EZGO goes only in high speed !HELP!
Obviously both POS and NEG mains until you figure out where the mistake is....
Follow the diagram one cable at a time, and see if you can find your problem |
Tags |
1989, controller, electrical problem, series cart, solenoid |
|
|
Similar Threads | ||||
Thread | Forum | |||
high speed gears with emp 2 speed, advice please | Electric EZGO | |||
1985 G1 Runs fine low speed , high speed run for a mile then fall on its face | Gas Yamaha | |||
WTB High speed motor for ezgo | Golf Carts and Parts | |||
high speed gear set for 85 ezgo | Electric EZGO | |||
High Speed Motor - EZGO Freedom | Golf Carts and Parts |