|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-31-2011, 11:45 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2008
Posts: 37
|
motor removal
1992 solid state, 1998 36v motor, 1993 rear end:
how do i remove the motor? i removed all bolts and wires and still could not pull motor off of rear end! do need a type of tree prong puller or something? it running a bit better but not great, it still does not have any torque but runs fast when it finally does, i need to check the brushes especially since the A2 stud spins around on the motor |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-31-2011, 11:56 AM
|
#2 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: motor removal
The longer it's been on the shaft the harder it is to pull. I have seen motor taken apart to get them off. Just have to keep working it until it comes off.
  |
|
|
|
|
07-31-2011, 12:07 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2008
Posts: 37
|
Re: motor removal
thanks Andy! any suggestions about why it does not have any torque?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Motor removal | Electric Club Car | |||
| IQ Motor Removal | Electric Club Car | |||
| 86 ezgo motor removal | Electric EZGO | |||
| Motor Removal? | Electric Club Car | |||
| Motor removal | Electric EZGO | |||
Linear Mode
