|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-28-2011, 08:30 PM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 14
|
ez-go 90's pds "still at it"
On the run tow switch pins on the controller I tested behind the plug in the holes for voltage, For orientation the latch for the plug is at the bottom as in the wire diagram, From what I undertand the switch is a stdp switch. Its either on or off.....Right? In run, pins 1,2,3 have voltage#4 is 0 volts. In tow position pins 1,2,3,and4 all have voltage. Is this sequence normal or not? The only power out of the J1 10 pin connector is pin #s 4,5, and 10.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
cicuits. no powe, run |
|
|
Similar Threads | ||||
Thread | Forum | |||
"Early 90's EZGO - Needs a Rebuild" | Gas EZGO | |||
"slow" Precedent "need Speed" | Gas Club Car | |||
Wheels and Tires in So Cal 22" paddles on Douglas, 25" Dunlop on ITP, 27" ITP's | Golf Carts and Parts | |||
"93" Club Car"...Rough /Hop/Hop Ride | Electric Club Car |