|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-16-2012, 03:05 PM | #1 |
Not Yet Wild
Join Date: Apr 2012
Posts: 2
|
Wiring question with RXV Direction Selector switch
Two part question. Part One: I have a 30 amp voltage reducer with a yellow trigger wire to be wired to the Key switch. Has anyone wired one to one of these Directional Selector switches on an RXV. Does anyone know what terminal or wire I need to tap into on the switch. Will I have a problem with power to my accessories being interupted when I switch between RNF ?
Part Two: When I wire the radio there is a yellow (battery wire) and Red (switch wire). Should I wire both to my fuse block and not worry about the memory. I assume it is just for pre-sets and maybe clock. Or is it ok to wire the yellow directly to one of the batteries. If so will it draw on that battery too much. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-17-2012, 07:55 AM | #2 |
Not Yet Wild
Join Date: Apr 2012
Posts: 2
|
Re: Wiring question with RXV Direction Selector switch
The switch has 4 wires coming out of it from a plug. Yellow, Green, Red and White. I'm guessing the yellow one is what I want to tap. Can anyone confirm ?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
direction selector handle & bracket needed | Bike & ATV Engine Swaps | |||
Precedent Gear Switch Selector | Electric Club Car | |||
Row/tow switch direction? | Electric EZGO | |||
84 EZGO motor & direction switch wiring | Electric EZGO |