|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-13-2012, 09:55 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Please help!!
i just got all my parts in (alltrax 500 HD400 solenoid 2 extra batteries to make 48 volt and a resistor, now, im hooking the pack up so i can use a 36 volt charger and a 12volt charger but everytime i try to put the last wire on the -battery post coming from B-on alltrax i get a good spark whats going on?? this isnt normal is it? and also i have 12volts where im suppose to but i dont have 36 volts between my 2(36volt)charger leads and were going riding in the morning please any help! ThankYou
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-13-2012, 09:58 PM
|
#2 |
|
Gone Wild
Join Date: Apr 2012
Location: South Louisiana
Posts: 488
|
Re: Please help!!
Posts some pics of what you have should help get it fixed
|
|
|
|
|
07-13-2012, 10:00 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
i dont have a way to them on my pc:(
|
|
|
|
|
07-13-2012, 10:07 PM
|
#4 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,401
|
Re: Please help!!
Can you a least tell us what year ezgo and what drive system?
 |
|
|
|
|
07-13-2012, 10:17 PM
|
#5 |
|
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
2003 ezgo txt PDS sorry
|
|
|
|
|
07-13-2012, 10:21 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,401
|
Re: Please help!!
A PDS will spark unless you have the run/tow switch in tow... it happens... The spark is no big deal
 DO you have a voltmeter so you can check your voltage where your 36v and 12v chargers are connected? What diagram are you following? |
|
|
|
|
07-13-2012, 10:27 PM
|
#7 |
|
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
i have 12 volt right. but not 36 i followed the diagram off here it said original posted by scottyb. i put the resistor between the 2 big terminals on on 400 solenoid but do i have to put a diode too? if so shouldnt have come with kit
|
|
|
|
|
07-13-2012, 10:42 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,401
|
Re: Please help!!
I send out a resistor and diode with each solenoid. You need a 3amp diode for 48v. It will run without it but it will shorten the life of the solenoid.
Here is a diagram for you on the 12 & 36v chargers recharging a 36v ezgo battery pack. |
|
|
|
|
07-13-2012, 10:46 PM
|
#9 |
|
Gone Wild
Join Date: Jun 2011
Posts: 191
|
Re: Please help!!
What do you have if you do not have 36v?
|
|
|
|
|
07-13-2012, 10:50 PM
|
#10 |
|
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
where can i get diode tomorrow? or can i? where do i put B- from controller
|
|
|
|
Linear Mode
