|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-13-2012, 10:55 PM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Please help!!
Your scaring me now
B- from the control goes to the battery pack main - in your case 48v- |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-13-2012, 11:01 PM | #12 |
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
man i am lost bad. this is my 1st time doing this
|
07-13-2012, 11:08 PM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Please help!!
I just added the install diagram to my last post..... does that help?
|
07-13-2012, 11:13 PM | #14 |
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
yes a little bit but everytime i hook the fused B- from controller to last open neg. terminal it gives big spark
|
07-13-2012, 11:18 PM | #15 |
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
its late and im confused bad lol
|
07-13-2012, 11:20 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Please help!!
Triple check you are wired correctly per the diagram or the diagram you got with the kit you got?
Remove the resistor from the solenoid and then tell me what the voltage reading is between controller B+ and B- |
07-13-2012, 11:30 PM | #17 |
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
0.19dc
|
07-13-2012, 11:41 PM | #18 |
Not Yet Wild
Join Date: Jul 2012
Location: Olive Branch, MS
Posts: 42
|
Re: Please help!!
should i have 2 cables hooked to B+ controller or just 1
|
07-14-2012, 12:18 AM | #19 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Please help!!
There is more than one way to wire this .... but if you follow the diagram I posted it will work. You must put the run tow switch into to tow mode now and switch it to run last after your final connections. Hope this helps.
|