Alright guys I need your expertise!!

scottyb · 12-13-2012, 10:30 AM

F&R micro switch?
Available at any GC shop or GC parts house.

Tom Burke · 12-13-2012, 10:59 AM

10606-g3 got it coming!

Tom Burke · 01-07-2013, 04:44 PM

Finally back at it. Does anybody have a diagram on how to properly wire up the pedal switch? When I installed the new switch I got nothing.

Tom Burke · 01-08-2013, 09:29 AM

I removed all existing wires and just started over. All good now for the cart now on to the charger. If I turn the charger on what should the voltage be? When not hooked up to the cart. Right now it reads about 36-37 volts.

scottyb · 01-08-2013, 09:34 AM

charger will go upwards of 44-46 volts

Tom Burke · 01-08-2013, 09:36 AM

Sweet now I get to tear that apart. Where can I find some trouble shooting guides. Or test procedures?

JohnnieB · 01-08-2013, 09:44 AM

What charger do you have? Picture of face plate if you can't find the model.

Monitor the battery pack voltage.
It will start at whatever the discharged pack was at and then climb into the 44-46 volt range when the batteries near being fully charged, which may take hours 6 to 8 hours.

Tom Burke · 01-08-2013, 09:51 AM

When i plug it into the cart and turn on the amp needle hardly moves. Pack voltage is 39.16. The charger is a Lester-matic #model# 8714 ImageUploadedByTapatalk1357656440.939589.jpg

scottyb · 01-08-2013, 09:51 AM

Quote:

Originally Posted by Tom Burke

Sweet now I get to tear that apart. Where can I find some trouble shooting guides. Or test procedures?

Let us know exactly why you think you need to tear the charger apart?

Tom Burke · 01-08-2013, 09:53 AM

Thought I needed to open it up for testing the transformer. Didn't think the out put is right.

12-13-2012, 10:30 AM	#21
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,402	Re: Alright guys I need your expertise!! F&R micro switch? Available at any GC shop or GC parts house.

01-08-2013, 09:34 AM	#25
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,402	Re: Alright guys I need your expertise!! charger will go upwards of 44-46 volts

01-08-2013, 09:44 AM	#27
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: Alright guys I need your expertise!! What charger do you have? Picture of face plate if you can't find the model. Monitor the battery pack voltage. It will start at whatever the discharged pack was at and then climb into the 44-46 volt range when the batteries near being fully charged, which may take hours 6 to 8 hours.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Hey guys :)	Electric EZGO
ok guys, im having a fit here	Gas Yamaha
Hey Guys	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-13-2012, 10:59 AM	#22
Tom Burke Gone Wild Join Date: Sep 2011 Location: Lake Isabella, Michigan Posts: 250	10606-g3 got it coming!

01-07-2013, 04:44 PM	#23
Tom Burke Gone Wild Join Date: Sep 2011 Location: Lake Isabella, Michigan Posts: 250	Finally back at it. Does anybody have a diagram on how to properly wire up the pedal switch? When I installed the new switch I got nothing.

01-08-2013, 09:29 AM	#24
Tom Burke Gone Wild Join Date: Sep 2011 Location: Lake Isabella, Michigan Posts: 250	I removed all existing wires and just started over. All good now for the cart now on to the charger. If I turn the charger on what should the voltage be? When not hooked up to the cart. Right now it reads about 36-37 volts.

01-08-2013, 09:36 AM	#26
Tom Burke Gone Wild Join Date: Sep 2011 Location: Lake Isabella, Michigan Posts: 250	Sweet now I get to tear that apart. Where can I find some trouble shooting guides. Or test procedures?

01-08-2013, 09:51 AM	#28
Tom Burke Gone Wild Join Date: Sep 2011 Location: Lake Isabella, Michigan Posts: 250	When i plug it into the cart and turn on the amp needle hardly moves. Pack voltage is 39.16. The charger is a Lester-matic #model# 8714 ImageUploadedByTapatalk1357656440.939589.jpg

01-08-2013, 09:53 AM	#30
Tom Burke Gone Wild Join Date: Sep 2011 Location: Lake Isabella, Michigan Posts: 250	Thought I needed to open it up for testing the transformer. Didn't think the out put is right.