02-13-2014, 02:43 PM | #1 |
Not Yet Wild
Join Date: Feb 2014
Location: Naples Florida
Posts: 34
|
Is this right ?
Hey guys. Hope I'm not breaking any rules on starting a new thread when I already have one going, (This has got to be an '86 common problem. I hope), but I just wanted to put this out there fresh. I was reading other threads and my symptoms were referenced to the motor possibly not wired correctly.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-13-2014, 02:59 PM | #2 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Is this right ?
|
02-13-2014, 03:12 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Is this right ?
This diagram may help too
|
02-13-2014, 03:32 PM | #4 | |
Not Yet Wild
Join Date: Feb 2014
Location: Naples Florida
Posts: 34
|
Re: Is this right ?
Quote:
|
|
02-13-2014, 03:43 PM | #5 |
Not Yet Wild
Join Date: Feb 2014
Location: Naples Florida
Posts: 34
|
Re: Is this right ?
Does this look right to you ? The lugs on my motor are off set like in drawing. So the outside top would be A1 and below that A2 and to the right top S1 and below S2 ?
|
02-13-2014, 05:14 PM | #6 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Is this right ?
That looks right, the armature connections are usually the furthest to the outside of the motor.
If you finish the first drawing showing where the rest of the F&R switch connection go, folks will be able to tell you if it is right. |
02-13-2014, 07:40 PM | #7 | |
Not Yet Wild
Join Date: Feb 2014
Location: Naples Florida
Posts: 34
|
Re: Is this right ?
Quote:
|
|
02-13-2014, 07:46 PM | #8 |
Gone Wild
Join Date: Jun 2013
Location: San Clemente, CA
Posts: 259
|
Re: Is this right ?
They usually stamp the case with the designations - A1, S1, A2, S2.
Maybe clean the case to see if you can find some stampings. Then you can use the wiring diagram and get it connected? |