Reverse Buzzer

[billbeach]

My cart is a 2000 PDS. I am the second owner. When the first owner ordered the car, he had them turn off the Regen (level area and did not need automatic braking) & Reverse Buzzer (didn't like the noise in reverse). Now I need to be able to run diagnostics. What is the most likely way a dealer would disable a reverse buzzer? I don't know where to start looking. I checked J1 pin 10 and it has a Red/Black wire. Thanks for any help.

[JohnnieB]

The beeper is mounted on the side of the passenger side glove box. You can see two pop-rivets inside the box.

If you look under the cowl, you might be able to see if a wire has been removed from the beeper. (Hopefully the black/green one since the red one is hot all the time.) Be sure to put the Run/Tow switch into Tow before reconnecting it.

If you cannot reach it under the cowl, you'll have to remove the keyswitch panel. Push the center pin of the pop rivet through and the rivet will come out.

[billbeach]

Originally Posted by JohnnieB

The beeper is mounted on the side of the passenger side glove box. You can see two pop-rivets inside the box.

If you look under the cowl, you might be able to see if a wire has been removed from the beeper. (Hopefully the black/green one since the red one is hot all the time.) Be sure to put the Run/Tow switch into Tow before reconnecting it.

If you cannot reach it under the cowl, you'll have to remove the keyswitch panel. Push the center pin of the pop rivet through and the rivet will come out.

I found it by taking out my direction switch which is on the dash. You might know the red wire was disconnected.
Thanks for your help.