08-09-2007, 06:57 PM | #1 |
Not Yet Wild
Join Date: Aug 2007
Posts: 5
|
1984 ezgo two stroke
I have a 1984 ezgo two stroke, I have a newly rebiult I installed an elecric fuel pump,( I was going to convert to 20 hp 4 stroke) but I rebuilt the two stroke. Cart ran great for two weeks. I left the cart at the lake so my buddy could use it. When I returned would not start. checked everything,no spark so I replaced the coil pack. It started and ran for one minute,then dies. it will start right back up and dies. So I relaced the solenoid and battery today.
same problem, this is driving me nuts. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2007, 05:12 AM | #2 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Re: help me
You might want to check the carb!!!!!!!!!!!!!!! and fuel filter
|
08-10-2007, 06:06 AM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,009
|
Re: help me
I think there is an igniter (sp) on that cart. may want to check that.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-10-2007, 06:02 PM | #4 |
Not Yet Wild
Join Date: Aug 2007
Posts: 5
|
Re: help me
the carb has just been rebuilt , the fuel filter is new. Where is this igniter ??
|
08-11-2007, 07:14 AM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,009
|
Re: help me
I'm not sure, we need an ez-go guy to jump in here!!!!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-11-2007, 10:57 AM | #6 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: help me
I can only assume the igniter has gone bad, it looks like a small cube with 5 wires comming out of it (I think). It should be next to the voltage regulator. I haven't seen one of those carts in an easy 20 years or so any info from me would be a guess. You can pm Bob-O, he may know about it. I know he has worked on some of the older carts. look up his name in the members list.
|
08-11-2007, 08:10 PM | #7 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: help me
did you take the head off? I know with 2 stroke dirtbikes the head has to be torqued down to a certain spec or it gets too high of a compression.
|
08-12-2007, 10:02 PM | #8 |
Not Yet Wild
Join Date: Aug 2007
Posts: 5
|
Re: help me
I have not taken the head off , I will try the igniter. Thanks for the ideas guys.
|
08-13-2007, 11:59 AM | #9 |
Peanut
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 656
|
Re: help me
IF you find the ignitor to be a problem, I have a good, used one I am willing to sell. PM me if interested.
|
08-14-2007, 06:34 PM | #10 |
Not Yet Wild
Join Date: Aug 2007
Posts: 5
|
Re: help me
just in case how much??
|