|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-28-2011, 02:00 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 8
|
Removed oil injection-question
Removed oil tank and oil lines,oil injection pump on front of motor,also put bolt in the injection hole on top of engine. All went okay. My questions are, do i need to put a cover over the hole with the square drive that the pump was driven by on front of motor, or just leave it open? 2nd question is the fuel mix one more time before i fill the gas tank, i'm going to use this 1985 at a camping lot to give rides to grand kids, also drive around from lot to lot, is the 128:1 ratio okay for this type of use? Thanks for all the advice---terry
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-28-2011, 04:35 PM | #2 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: Removed oil injection-question
128:1 is perfect, and as to the hole, there's no NEED to cover it but it will help keep potentially damaging debris, etc out of your fan if you do
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Removed Mfg tag | Extreme DC! | |||
Oil Injection | Gas EZGO | |||
81 G1 oil injection going BYE,BYE | Gas Yamaha | |||
Wires removed... Not important, are they? | Electric Club Car | |||
Windshield scratches removed | Electric Club Car |