|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-18-2015, 10:02 PM
|
#1 |
|
Getting Wild
Join Date: Apr 2013
Location: Central City, KY
Posts: 105
|
1997 EZGO TXT Gas frame specs/bent
I am in the process of building a 1997 ezgo txt from the frame up. I have discovered the the frame looks to be bent in the rear. Looks like it may have struck something in the back. The measurements between the leaf spring mounting holes center of each hole to center are 27 inches on the driver side and 26 1/2 on the passenger side. Which one of these measurements is correct? Any ideas on fixing it?
Thanks in advance, Jordan. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-20-2015, 12:06 PM
|
#2 |
|
Getting Wild
Join Date: Apr 2013
Location: Central City, KY
Posts: 105
|
Re: 1997 EZGO TXT Gas frame specs/bent
Can anyone measure their cart and see what the measurement is from the leaf spring mounting bolts center to center?
|
|
|
|
|
06-20-2015, 01:00 PM
|
#3 |
|
Gone Wild
 Join Date: Nov 2013
Posts: 706
|
Re: 1997 EZGO TXT Gas frame specs/bent
26.5" to center of front mount and center of rear mount, But that is not how long your spring is because of the rear shackle that hangs from the rear mount.
 |
|
|
|
|
06-20-2015, 02:08 PM
|
#4 |
|
Getting Wild
Join Date: Apr 2013
Location: Central City, KY
Posts: 105
|
Re: 1997 EZGO TXT Gas frame specs/bent
Okay. Thank you very much. I looked everywhere for frame measurements on line and couldn't find them. I figured they would be in the manual.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Bent Frame | Electric EZGO | |||
| Think my frame is bent G9 | Gas Yamaha | |||
| Bent Frame | Electric Club Car | |||
| Bent Frame???? | Electric Club Car | |||
| Bent frame on a G9 | Gas Yamaha | |||
Linear Mode
