07-30-2019, 02:12 PM | #1 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
2009 rxv
I am working on a rxv the encoder replaced along with the break the batts r trojan 12volt and all around 12.4 resting voltage. The issue is a hard jerkyness like cart can't make up it's mind on a speed. Excelerates to about 14 then jerks hard slows then speeds up and repeat. I can keep it about 3/4 throttle and all is good. The start up is weird to me doesn't rock as hard as others but finished the sequence and cart takes off. Any ideas from the peanut gallery.
Sent from my XT1575 using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-30-2019, 02:16 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2009 rxv
Corrosion on the harness, polluting the encoder signal.
|
07-30-2019, 03:08 PM | #3 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: 2009 rxv
Well since I posted I have found that if I turn the steering wheel about a 1/4 turn to the right the cart is flawless. I am checking my connections now. Noid is hot. Seems like this issue has been in cart the wire covers r all missing so somebody been in it
Sent from my XT1575 using Tapatalk |
07-31-2019, 02:42 PM | #4 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: 2009 rxv
Well I am pretty sure it is the controller. I can make it mess up pretty good by tapping on the case. So I think the circuit is ready to go. Hoping guy will do that green controller next[emoji3]
Sent from my XT1575 using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2009 RXV will not run | Electric EZGO | |||
2009 RXV vs. 2009 Precedent - both gas | Gas EZGO | |||
2009 gas Precedent vs. 2009 gas RXV | Gas Club Car | |||
Got a 2009 Ez-Go | Electric EZGO |