|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-28-2020, 09:52 PM | #1 |
Not Yet Wild
Join Date: Sep 2020
Location: Rock Hill, SC
Posts: 26
|
Help with new solenoid install
So, I'm starting to order parts to replace all those that were clearly underwater or severely rusted in this flood cart that I bought (2008 Precedent Champion Electric).
I'm going to be going with the Navitas AC setup. That will replace the controller and motor. I now need a solenoid and just bought this one. Question is, do I still need a resistor and/or diode for it? Looks like it may be built-in and hoping someone has run across this scenario before. Also, I'll be converting to 72V before the end of the year and am wondering if I'll need to swap the solenoid at that time or if this one will still work. Thanks for any help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2020, 10:30 PM | #2 | |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Help with new solenoid install
Quote:
|
|
09-28-2020, 10:34 PM | #3 |
Not Yet Wild
Join Date: Sep 2020
Location: Rock Hill, SC
Posts: 26
|
Re: Help with new solenoid install
https://www.amazon.com/TABODD-MZJ-40.../dp/B081CSZCZF
The link was embedded in my original post but I broke it out here. My original solenoid is SU60-2122P 48V. |
09-29-2020, 08:27 AM | #4 |
Not Yet Wild
Join Date: Sep 2020
Location: Rock Hill, SC
Posts: 26
|
Re: Help with new solenoid install
I'm thinking that I do not need the resistor/diode based on what I read here: https://golfcartsmodified.com/produc...-400a-solenoid
|
09-29-2020, 10:08 AM | #5 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Help with new solenoid install
You should always have a diode across the Solenoid coil for Golf Cart applications.
The pre-charge resistor across the Solenoid contacts is dependent on the controller model used, You need to check with Navitas on the specific model you are getting. |
09-29-2020, 03:38 PM | #6 |
Not Yet Wild
Join Date: Sep 2020
Location: Rock Hill, SC
Posts: 26
|
Re: Help with new solenoid install
Thanks Sergio
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New xct 400 and HD solenoid install on PDS NEED HELP | Electric EZGO | |||
Solenoid and Potentiometer Install | Electric Club Car | |||
HD solenoid install | Electric Club Car | |||
HD solenoid install | Electric EZGO | |||
new H/D solenoid install | Electric EZGO |