|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-30-2021, 11:27 AM | #1 |
Not Yet Wild
Join Date: Jun 2021
Posts: 3
|
1995 36V EZGO Medalist / HD Selenoid Wiring
I have a 1995 36v EZGO Medalist and just replaced the original components with an Admiral Mot-B1 motor, Navitas 600 amp controller, HD Selenoid, and HD F/R Switch. I feel like I've wired everything correctly, but my cart will only move in reverse. Selenoid doesn't contact (knock) in the forward position when engaging the throttle. Any ideas or wiring diagrams avaialble? Any help is appreciated!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2021, 11:48 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: 1995 36V EZGO Medalist / HD Selenoid Wiring
Check your micro switch wiring on the fnr switch. Left switch is the run switch and will engage in F and R. Right one is for reverse.
|
06-30-2021, 12:16 PM | #3 |
Not Yet Wild
Join Date: Jun 2021
Posts: 3
|
Re: 1995 36V EZGO Medalist / HD Selenoid Wiring
KGSC This is my first cart so I might be a little ignorant. Am i looking for voltage at that micro switch? Or just proper wire connections. The only difference that I'm noticing in the upgrade is the old controller had an A2 cable going from the controller to the "C" location in the F/R switch. The new controller says to get rid of it since there is no A2 on the new controller.
|
Tags |
admiral, navitas, selenoid |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1995 Medalist wiring | Electric EZGO | |||
1995 ezgo medalist...series..wiring question | Electric EZGO | |||
EZ go wiring help 36v 1995 medalist | Electric EZGO | |||
Need wiring diagram for a 1995 ezgo 36 volt medalist | Electric EZGO | |||
1995 EZGO medalist wiring question | Electric EZGO |