|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-21-2022, 03:03 PM | #1 |
Not Yet Wild
Join Date: May 2021
Posts: 19
|
Precedent field coil problem
I broke the field stud off on my motor when upgrading to 2 gauge cables so I got a new brass bolt to replace it. I removed the old bolt from the field coil wires then soldered them to the new bolt and reinstalled it in the motor with the insulator in place. Now my cart won't move either direction. I have a tsx 3.0 controller and it shows correct direction and the solenoid is opening and closing correctly. I also can see that when I press the pedal I have 51 volts for the field but no field current. Do I just not have a good connection to the field wires? Everything worked fine before I broke the original stud
Sent from my SM-G965U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Field coil stud repair | Electric EZGO | |||
Field coil rewind | Extreme DC! | |||
Field coil trouble GE 2 1/2 hp motor series | Electric EZGO | |||
4hp field coil kits for ezgo 36volt | Electric EZGO | |||
3 1/2 hp. field coil question | Electric EZGO |