|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-11-2010, 10:46 PM | #1 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
pic of new ride! need help w wiring on 80 ezgo
Just brought her home tonight.the seller swore up & down that it runs good & he seen it run but can not remember how the coil & all the ground faults(saftey switches) were hooked up? I have looked all over & can not find the info???? can anyone send me pics of their wiring for the coil & pedal/key swith?I notice there is a yellow swith comming from the firewall & a blue wire coming from the engine? what wire goes to the coil? the yellow coil seems to have power & the blue has none?
Thank you soooo very much to ignore my ignorance...HAHA Last edited by Thimmesch1; 08-11-2010 at 10:50 PM.. Reason: better explanation |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-12-2010, 06:34 AM | #2 |
Gone Wild
Join Date: Jun 2008
Location: Raytown, Missouri
Posts: 894
|
Re: pic of new ride! need help w wiring on 80 ezgo
Not sure if yours is wired like this but it might help sort some wires? Good Luck
http://http://www.buggiesgonewild.co...chematics.html |
08-12-2010, 08:56 AM | #3 |
Peanut
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 656
|
Re: pic of new ride! need help w wiring on 80 ezgo
Nice ride Thimmesch1! I can tell ya right off the bat that that engine is a late 70's model 1PG Robin/Fuji Heavy Industries engine. It is wired differently than an 80's and up model. I have modified a VERY early 70's wiring diagram to match the late 70's (see signature ).
HERE is the diagram, hopefully it is clear enough. Let me know if you have any problems! |
08-12-2010, 07:46 PM | #4 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
Re: pic of new ride! need help w wiring on 80 ezgo
Thanks guys!! the first reply pops link wouldnt work for me.
mb your pic opened for me,Thanks I will try that. I want to get it running so I can Paint it!! any word on that engine? parts available? seals go out easily? rebuild parts? Thanks again Dave Last edited by Thimmesch1; 08-12-2010 at 07:47 PM.. Reason: names mixed up |
08-14-2010, 02:24 AM | #5 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
Re: pic of new ride! need help w wiring on 80 ezgo
I have spark!!! in forward & rev
I have 125 psi in for & rev just have to drain the stinky gas & button up some electrical connections engine id is EC25ds Thanks Guys Crossing my fingers!!! |
08-15-2010, 04:00 PM | #6 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
Re: pic of new ride! need help w wiring on 80 ezgo
figured out the wiring(I think) now I have backfing issues going to start new tread v video of it running & everything i have tried(from researching this site)
Thanks again Dave |
08-15-2010, 04:14 PM | #7 |
Peanut
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 656
|
Re: pic of new ride! need help w wiring on 80 ezgo
Glad to hear you got it running! There are upper end parts and some of the lower seals available for this engine. The starter/generator parts (besides the brushes) are no longer available. Most of the other parts on the cart can be found in the aftermarket... mainly online.
The backfire issue is probably due to the throttle butterfly not closing all the way when the engine is not firing but still spinning (coasting). Make sure the throttle cable is tight and the butterfly is all the way closed when the pedal is in the OFF position. |
08-15-2010, 10:02 PM | #8 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
Re: pic of new ride! need help w wiring on 80 ezgo
the backfire is WOT condition and at Wide Open Throttle it pops,bangs,but never stalls ,but continues to sputter with very little improvement when closing & opening the choke. see video in next backfire tread. need trouble shooting specs for the ignition(my opinion) could also be fuel system? forgot to mention ,I did clean the carb.
Thanks |
08-25-2010, 09:39 PM | #9 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
Re: pic of new ride! need help w wiring on 80 ezgo
just putting a rest to this tread & explaning after I got it running with help of the forum with a wiring diagram I had a backfiring issue ,then with the help of this forum realized it was the condenser. I am now going to perform an HEI conversion that was learned from this forum!!!! please support the advertisers or donate to this site!!! rather than paying a tech!! 100.00 an hr
or you will have no help!!! Thanks again |
09-25-2013, 06:36 PM | #10 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
Re: pic of new ride! need help w wiring on 80 ezgo
got rid of the cheezy red white n blue.
painted it orange...pumkin mobile. sold it and moved on to a 94 4 stroke,not the melex next to it sold that one too. build pics coming soon.http://www.buggiesgonewild.com/attac...1&d=1380152064 |
Tags |
wiring gas |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
wild ride (elc ezgo galf cart prob) | Electric EZGO | |||
non dcs ezgo FNR wiring | Electric EZGO | |||
87' EZGO Wiring | Gas EZGO | |||
ezgo wiring | Electric EZGO | |||
EzGo wiring help | Electric EZGO |