lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-27-2011, 09:11 AM   #11
Mike Mac
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
Default Re: Still on the hunt

Don't know for sure, but 14's have some specific parts that don't fit other cars. Just as my G8 does. But that hasn't stopped me from being very pleased with my G8!!! And I'd do another 8 in a heart beat! So they are ALL GOOD. I think 16 are more plentyfull, and have the most after market parts. But also know, that just like GM, many parts fit, many different year carts, with Yamaha!! (Couldn't tell ya about the others).

If it were me, I'd do a 16 if I found a good one. (Straight frame would high on list). If I could afford newer, I'd go G22 with a long travel Jakes. And I'd go hunt down Shmo and ask him about them. There is a current thread in elect.yamaha on his car, Nice!

Shmo, has a 16 also!
Mike Mac is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-27-2011, 09:22 AM   #12
jackel440
Gone Wild
Yamaha
 
Join Date: Aug 2009
Location: Galveston,IN
Posts: 386
Default Re: Still on the hunt

Ok I just texted the gentleman with the carts.he told me the g14 are 95' to 96' models.He also said he has some g16 carts starting at$1800. So maybe I should save a little longer and get the 16.?
jackel440 is offline   Reply With Quote
Old 05-27-2011, 11:16 AM   #13
Mike Mac
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
Default Re: Still on the hunt

My opinion, you can't go wrong with a 16. My opinion, you can't beat a Jake's single A-arm lift. If you have lots of money, do the long travel, about $750., but the A-arm will get you everywhere you want to go, around $300.

Shmo's thread may be in "lifted carts".

You can also contact stuff4mason, he's had quite an ordeal rebuilding a g8!! And it came out great! He can coach you on alot of things to do and not to do.
Mike Mac is offline   Reply With Quote
Old 05-27-2011, 11:37 AM   #14
jackel440
Gone Wild
Yamaha
 
Join Date: Aug 2009
Location: Galveston,IN
Posts: 386
Default Re: Still on the hunt

Quote:
Originally Posted by Mike Mac View Post
My opinion, you can't go wrong with a 16. My opinion, you can't beat a Jake's single A-arm lift. If you have lots of money, do the long travel, about $750., but the A-arm will get you everywhere you want to go, around $300.

Shmo's thread maybe in "lifted carts".

You can also contact stuff4mason, he's had quite an ordeal rebuilding a g8!! And it came out great! He can coach you on alot of things to do and not to do.
I agree with you.I think a 6" a arm lift will be all I want for now.maybe if I build another one in the future I can go all out.I will check into those other threads when I get home instead of on my phone.I guess I will just have to be patient for now and save some more cash up.
jackel440 is offline   Reply With Quote
Old 05-27-2011, 11:59 AM   #15
Mike Mac
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
Default Re: Still on the hunt

Good move!
Mike Mac is offline   Reply With Quote
Old 05-27-2011, 12:31 PM   #16
shmo
Gone Wild
 
shmo's Avatar
Yamaha
 
Join Date: Jul 2010
Location: Lynden, Washington
Posts: 406
Default Re: Still on the hunt

If you plan on doing a non long travel lift, I agree with Mike. My vote goes for a G-16 or a G-19. They very similar. I personally feel those carts with the 6" A-arm lift work better than the newer carts with the spindle lifts. I am really happy with the G-19 I lifted. It works great.

I was not happy with the performance of my spindle lift on a G22, some guys love them however. Now, if you decide to go long travel, I would prefer the newer G-22 through G-29 carts.

Here is a link to my Yamaha builds. I hope it helps you. http://www.buggiesgonewild.com/lifte...ric-build.html

SHMO
shmo is offline   Reply With Quote
Old 05-27-2011, 03:52 PM   #17
jackel440
Gone Wild
Yamaha
 
Join Date: Aug 2009
Location: Galveston,IN
Posts: 386
Default Re: Still on the hunt

Quote:
Originally Posted by shmo View Post
If you plan on doing a non long travel lift, I agree with Mike. My vote goes for a G-16 or a G-19. They very similar. I personally feel those carts with the 6" A-arm lift work better than the newer carts with the spindle lifts. I am really happy with the G-19 I lifted. It works great.

I was not happy with the performance of my spindle lift on a G22, some guys love them however. Now, if you decide to go long travel, I would prefer the newer G-22 through G-29 carts.

Here is a link to my Yamaha builds. I hope it helps you. http://www.buggiesgonewild.com/lifte...ric-build.html

SHMO
I think I will try and aim to get the G16. Unless of course something better comes along.
I did. Read through your bhild thread.very nice job with them and the details you ran into.I believe I will be sticking with just an a arm lift for now when money allows for it.I have to get a cart first.lol!
jackel440 is offline   Reply With Quote
Old 06-05-2011, 10:16 AM   #18
jackel440
Gone Wild
Yamaha
 
Join Date: Aug 2009
Location: Galveston,IN
Posts: 386
Default Re: Still on the hunt update!

Well I managed to pick me up a cart finally!
I didn't get the newer G16 like we talked about,but the deal was hard to pass up.
I will have to get pics of it later posted up.Probably start a new build thread on it.
Anyways I picked up 1991 G9 with unfortunately a stuck engine.Matter n fact it just froze up on them a week ago.purchase price of $250.It has an EZGO top on it that looks ok.When my son and I picked it up saturday.The gentleman said that another guy was trying to buy it from out from under me.He even offered more than I did for it.I also think it was the same guy who under cut me on the other one I looked at before.Golf Carts are HOT in Indiana I guess!
Seat is ripped and needs recovered.
The body plastic looks real good.
I hope to probably go the clone route on the engine.I thought about filling the cylinder with Kroil oil to see if it will free up.I am curious to see if I can get it running just for kicks.
Once I get it going then it will be time for lift and tires when I get the money.
catch ya guys later
jackel440 is offline   Reply With Quote
Old 06-05-2011, 11:37 AM   #19
Mike Mac
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
Default Re: Still on the hunt

G9's are very good carts!! Go see "The New Guy's" cart. Good Move!!! Just like any maintained Yamaha, they run forever, never break!!
I would definitely try to make it run, what have you got ta loose? For a couple hundred, you might be able to make it run, and not need the clone or sell it for more than just junk!

I think golf carts are very much on the rise. Look at all the venders on here that weren't here a year ago (Welcome). And how many new members signed up here lately.

I read somewhere, that "less than 5% of golf carts are on golf courses"!... So... Why do they call them golf carts? Why don't they call them "Run-a-bouts, or go-any-where's", or like my wife calls ours "That Crappin Cart"...AS she's reaching for the key!!
Mike Mac is offline   Reply With Quote
Old 06-06-2011, 09:49 AM   #20
G1-G9
LIFE IS TAKING FOREVER
 
G1-G9's Avatar
Yamaha
 
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
Default Re: Still on the hunt

the G9 was a good choice for the money. i paid $100 for mine and the engine was setup. its alot more stable on trails than the G16 is with out doing anything to the springs or shocks , we have a lifted G16 and on the trails it will scare you.
Attached Images
File Type: jpg SDC10010.JPG (59.8 KB, 12 views)
File Type: jpg SDC10027.JPG (56.9 KB, 12 views)
File Type: jpg SDC10029.JPG (54.3 KB, 13 views)
File Type: jpg SDC10106.JPG (48.6 KB, 13 views)
File Type: jpg SDC10143.JPG (64.0 KB, 14 views)
G1-G9 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Gator Hunt Hunting and Fishing
scotty's scavenger hunt build Extreme DC!
Texas Hog Hunt!!!!!!!! Hunting and Fishing


All times are GMT -5. The time now is 12:01 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.