|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2012, 09:31 AM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
RXV OEM SOC METER - What size hole to drill?!
Hi Everyone,
I bought a factory state of charge meter for my 2008 RXV. It has the extra wire behind the dash to hook up the meter to. Does anybody know what size hole saw I should buy do drill out the factory dash for the meter? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2012, 01:34 PM | #2 |
Not Yet Wild
Join Date: Jun 2012
Location: Rockport,In
Posts: 38
|
Re: RXV OEM SOC METER - What size hole to drill?!
2" hole saw
|
07-08-2012, 10:08 AM | #3 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Re: RXV OEM SOC METER - What size hole to drill?!
thx... gotta go pick one up today!
|
07-08-2012, 07:55 PM | #4 |
Not Yet Wild
Join Date: Dec 2010
Location: South Mississippi
Posts: 66
|
Re: RXV OEM SOC METER - What size hole to drill?!
I am in need of one of these also. Where is the best place to purchase a factory style meter? Do I have to purchase from ezgo??
|
07-08-2012, 08:04 PM | #5 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Re: RXV OEM SOC METER - What size hole to drill?!
buggies unlimited has it for $47. my local dealer was $70. I would just buy it online. here is the link: http://wwwbuggiesunlimitedcom/productaspsku=8062
|
07-08-2012, 08:09 PM | #6 |
Not Yet Wild
Join Date: Dec 2010
Location: South Mississippi
Posts: 66
|
Re: RXV OEM SOC METER - What size hole to drill?!
Thanks!! This one will plug directly into factory harness, correct?
|
07-08-2012, 08:10 PM | #7 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Re: RXV OEM SOC METER - What size hole to drill?!
Pretty sure it will. That's what I read online. I'll let you know Tuesday when it is delivered!
|
07-11-2012, 07:59 PM | #8 |
Not Yet Wild
Join Date: May 2010
Posts: 46
|
Re: RXV OEM SOC METER - What size hole to drill?!
The OEM gauge plugged right in to the factory harness and everything works great. The 2 inch hole saw is the exact size and I picked that up at home depot for $8. It's an easy install.
|
07-12-2012, 07:28 PM | #9 |
Not Yet Wild
Join Date: Dec 2010
Location: South Mississippi
Posts: 66
|
Re: RXV OEM SOC METER - What size hole to drill?!
Thanks. I have one on order myself!
|
07-13-2012, 01:52 PM | #10 |
Not Yet Wild
Join Date: May 2012
Posts: 4
|
Re: RXV OEM SOC METER - What size hole to drill?!
I just did mine last week using a dremel bc we needed that to do the lights as well. It worked fine as im sure a hole bit will too.
And yes it does plug into the harness that is part of the RXV non-freedom model. If your also adding lights and want to mount the OEM switch to the left of the SOC meter on the dash, you need a work around bc the OEM switch is meant to be plugged into a harness...the one you just used for the SOC meter...go figure. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Drill bits | Design Center | |||
Is it OK to drill thru the frame? | Gas Yamaha | |||
#90 Main Jet Drill Size | Gas EZGO | |||
How to drill Jet | Gas Yamaha | |||
drill & tap | Big Block Talk! |