|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-27-2013, 06:13 PM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 5
|
1984 EZ-GO 244cc Robin Engine Need Torque Spec's
Does any one know when reassembling the Robin 244cc engine and clutch does any or all bolts get torqued to something specific? If so can I get all the torque ratings? Also whats the best way to tune a new carb by sound or any suggestions on that?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-28-2013, 06:30 AM | #2 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 1984 EZ-GO 244cc Robin Engine Need Torque Spec's
Ok FAST your lucky day
Piston ring end gap .008-.016 Piston to bore clearance .0023-.0036 ALL FT. LBS. crankcase 18-20 cylinder 24-28 head 17-18 cooling fan 20-24 spark plug 18-21 clutch draw bolt 54-55 spark plug gap 28-30 compression ratio ( just for kicks) 6.0 - 1 LOU |
03-28-2013, 10:59 AM | #3 |
Not Yet Wild
Join Date: Mar 2013
Posts: 5
|
Re: 1984 EZ-GO 244cc Robin Engine Need Torque Spec's
Thank you awesome response on the spec's i need.
|
Tags |
setting new carb |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
robin 244cc engine spec's | Gas EZGO | |||
Robin 244cc engine | Gas EZGO | |||
WANTED: Robin 244cc engine | Golf Carts and Parts | |||
3 wheel ez go 244cc robin engine no spark | Gas EZGO | |||
1988 marathon 244cc robin 2pg engine | Gas EZGO |