|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-21-2013, 01:32 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2013
Posts: 1
|
2004 EZGO TXT PDS - Freedom Chip Problems
Hey guys, new to this forum. Have been through all the threads and can't find a solution so I'm hoping someone here can help me. Have a 2004 EZGO TXT PDS system & installed a freedom chip. When checking what setting (N-R 5 times) it only goes into "steep hill mode". Checked the connections several times and can't get it resolved. Have even taken single wires and tried connecting the 1-5 on its own but it only stays in "all terrain mode". If I take that same single wire and connect the 2-3 on its own it switches to "steep hill" mode without a problem. Any ideas/help would be much appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-21-2013, 06:21 AM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2004 EZGO TXT PDS - Freedom Chip Problems
Sounds like dirty contacts in J2 or the plugs (chips).
Try spraying with contact cleaner and plug/unplug several times while still damp. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2010 EZGO PDS - Freedom Chip w/ 6" lift??? | Electric EZGO | |||
| PDS with Freedom chip...Only hear 2 beeps meaning Steep Hill chip? | Electric EZGO | |||
| Speed Freedom Chip or Steep Hill Chip? | Electric EZGO | |||
| 2004 EZ-GO PSD with Freedom chip engine still braking | Electric EZGO | |||
| Ezgo 2001 lift kit and freedom chip | Electric EZGO | |||
Linear Mode
