|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-20-2013, 01:09 PM | #1 |
Not Yet Wild
Join Date: Oct 2013
Location: Manvel TX
Posts: 27
|
4 Post Controller to 3 Post Controller
So i understand I am supposed to connect the 2 cables connected to A2 blade on the controller together....However, I only have 1 cable on the controller and it goes to the FNR.
A2 is post furthest left. What should i do? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-20-2013, 02:01 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 4 Post Controller to 3 Post Controller
Here is the diagram for Ezgo 4 blade controller. Study it and tell us where does your motor A2 cable go?
|
11-20-2013, 02:04 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 4 Post Controller to 3 Post Controller
EZGO saved some cable on later units by running a cable from A2 on the motor to A2 on the controller and another cable from A2 on controller to C on the F/R.
Older units had a long cable from A2 on motor to C and a cable from A2 on controller to C. If the new controller doesn't have an A2 terminal, just leave the cable from A2 on controller to C on F/R off. |
11-20-2013, 02:10 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 4 Post Controller to 3 Post Controller
Sneaky Ezgo bean counters.
|
11-20-2013, 03:23 PM | #5 | |
Not Yet Wild
Join Date: Oct 2013
Location: Manvel TX
Posts: 27
|
Re: 4 Post Controller to 3 Post Controller
Quote:
I am not home so i cannot look at it, but just want to make sure. I will look at it in a few hours. |
|
11-20-2013, 03:25 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 4 Post Controller to 3 Post Controller
That's right just remove the A2 controller cable to the F&R.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
A2 post on controller | Electric EZGO | |||
3 post required to Post in For Sale - Classifieds | Golf Carts and Parts | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
how can I post a picture of the controller? | Electric EZGO | |||
86 Club Car won't run on 36 volt post will on 18 or 24 post | Electric Club Car |