RPM Limiter Question

ellis555 · 04-20-2014, 09:13 AM

What advantage is there to cutting the beige wire to the rpm limiter? Thanks mine is cut.

lockman1 · 04-20-2014, 09:40 AM

Beige? or Brown?

The (brown) wire going to the left mounting bolt is the ground for the limiter,
in most cases, it's removed (or cut) from the mounting bolt so the engine won't shut down at higher RPM's!
(or if the limiter is bad, the cart won't start at all!)

04-20-2014, 09:13 AM	#1
ellis555 Not Yet Wild Join Date: Feb 2014 Location: Northwest Georgia Posts: 37	RPM Limiter Question What advantage is there to cutting the beige wire to the rpm limiter? Thanks mine is cut.

04-20-2014, 09:40 AM	#2
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,928	Re: RPM Limiter Question Beige? or Brown? The (brown) wire going to the left mounting bolt is the ground for the limiter, in most cases, it's removed (or cut) from the mounting bolt so the engine won't shut down at higher RPM's! (or if the limiter is bad, the cart won't start at all!)

Similar Threads
Thread	Forum
rev limiter and govenor question	Gas Club Car
Rev Limiter wiring question	Gas Club Car
Rev limiter question.	Gas Club Car
1990 Club car With flat head Rev limiter question and govenor question	Gas Club Car
rev limiter question???	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum