|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-09-2009, 10:15 AM | #1 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
My 2 week old G1 Rebuild PROJECT!
Here are some photos of dissambly of rear swing arm for 4.5 inch streching. I hope im doing this right as this is all new to me. Also first time since hs welding so i know it might not be pretty, when i start welding.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-09-2009, 10:18 AM | #2 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
on the Deck is my new (to me) honda gx240 and here is my eh29c that i blew the coil on that was in her. Didnt do to bad got to around 30 down the street and didnt smoke before i took her apart.
|
10-09-2009, 11:13 AM | #3 |
Gone Wild
Join Date: Apr 2008
Location: Wichita, KS
Posts: 1,530
|
Re: My 2 week old G1 Rebuild PROJECT!
Looks good
Keep posting! |
10-09-2009, 02:10 PM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: My 2 week old G1 Rebuild PROJECT!
Cool project. Thanks for the pic's....keep them coming.
|
10-09-2009, 03:27 PM | #5 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
im thinking im going to try and buy YFS200 front suspension and graft into the front of my g1 any one have any thoughts on this?
|
10-09-2009, 04:50 PM | #6 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
I'm wondering if 4x4 and 4x100 is the same I think they are
|
10-09-2009, 06:23 PM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: My 2 week old G1 Rebuild PROJECT!
Very interesting "single" shock rear suspenssion.
|
10-09-2009, 06:32 PM | #8 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
Ya that is how it was built when i got it. It seems pretty nice and stable. It rubs on the metalwork for the floor on the back so im going to move it further away but i think with the front end from the quad its going to come out nice and im sticking with yamaha quad parts to it will all be brank ok
|
10-12-2009, 10:58 AM | #9 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
Here is the new front end i purchased to graft on to my g1.
|
10-14-2009, 11:26 AM | #10 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
Here is my rear swing arm cut and ready to weld back up. Im going to have to cut my front wheels because the blaster front end is 4x156 and the cart is 4x100 but they are 10 inch rims so i dont think im going to have any issues. With amount cut out of the center they will look factory when im done. Im still trying to decide if i want to set the front out about 2" then get 2" spacers on the rear or fab the front with the same width as the rear.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1989 Marathon Rebuild/Upgrade Project | Electric EZGO |