lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-18-2010, 11:28 PM   #1
Roll Over
Not Yet Wild
 
Join Date: May 2010
Posts: 4
Default Replacing engine mounting bolts

Guys, I have a 96 gas powered Carryall. Two of the four engine mounting bolts broke off. I would like to reinstall the engine with out the skid plate being between the engine and the frame. My question is: will this height change, because the rubber spacers and skid plate will not be there, be bad for the cart or give me drive belt grief that I do not know about? Thanks
Roll Over is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
belt length / engine mounting Big Block Talk!
mounting a engine in my electric cart Design Center
help with engine mounting Gas EZGO
WTB Engine Mounting Plate for 96 Club Car Golf Carts and Parts
honda gx620 engine mounting plate Big Block Talk!


All times are GMT -5. The time now is 02:38 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.