lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-18-2012, 04:09 PM   #1
TBDoc
Not Yet Wild
Yamaha
 
Join Date: Jul 2012
Location: Jefferson Hills,PA
Posts: 4
Default Timing marks on crank & cam, also other issues

I have a 94 G6 Yamaha with a 9hp motor. I ran it low on oil and now the bottom of piston rod is hitting the crank, keeping it from turning any further. The engine is not seized. What is possible cause of this happening? I need to know how the timing marks line up inside the motor also. Thanks
TBDoc is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-19-2012, 01:52 AM   #2
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,441
Default Re: Timing marks on crank & cam, also other issues

there is dots or dimples on each crank gear, and on the cam and balance shaft gears. the dot must line up and face towards its corresponding crank gear dot.
cgtech is offline   Reply With Quote
Old 07-19-2012, 03:23 AM   #3
rib33024
......................
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,287
Default Re: Timing marks on crank & cam, also other issues

Welcome to BGW

check out this thread and see if it helps


http://www.buggiesgonewild.com/gas-y...tml#post316629

I just finished rebuilding a G9 that didnt have any markings on the cranks counter balance gear as well. And its a bit tricky to get right, but there is a way.

I took a look through my stash of pics and this should help expain how to line them up.

On the crank you will only see one indicating mark, that one you line up with the mark on the cam gear. Now the balancer shaft, has a mark on it as well. With the 2 other marks lined up, line up the balancer shaft so that the mark is pointing towards the middle of the crank.

Some of the yamaha cranks just didnt have 2 indicating marks on the crank gear.. well the ones that ive seen.. Supposively in the rebuild manual these 2 marked cranks existed. lol

Dont forget to prelube the crank bearings and such when you put the engine back together, this will help pervent a dry start and seize the motor.
rib33024 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
kf82 timing marks? Gas Club Car
Timing marks for engine assembly Gas Yamaha
Timing marks Gas Yamaha
If the timing marks appear correct then Gas EZGO
timing marks on crank Gas Yamaha


All times are GMT -5. The time now is 04:41 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.