![]() |
|
Side x Sides-ATV-Quads-Bikes-Jeeps-4x4's! Side x Sides, ATV's, Jeeps,4x4, Bikes, Quads, and everything else. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: May 2018
Location: North Indiana
Posts: 2
|
![]() Hello I have a 2014 yardsport ys200, recently I had some issues with the main fuse blowing after the key is turned on, first thing I am looking for is a picture of how the CDI is hooked up on the actual yardsport. One of the pins came out and now I am not sure if I am hooking up the CDI box correctly
Please if you have a yardsport ys200 please post or send me a picture of the CDI hooked up The CDI is hooked up under the dump bed, under the cover that is held down by two phillip screws. I did do some research on how in theory it is hooked up but it doesnt seem to be right for this application, I do have the wire diagram from the manufacture but its not entirely specific. Any Help is appreciated Thank you |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
Tags |
cdi, menards, ys200 |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
ATV: Yardsport YS36 4x2 The motor is not working | Electric Club Car | |||
Yard Sport YS200 | Side x Sides-ATV-Quads-Bikes-Jeeps-4x4's! | |||
Need help on picking a new engine on a Yardsport GY6 Land Master | Side x Sides-ATV-Quads-Bikes-Jeeps-4x4's! | |||
Need a Picture | Electric EZGO |