Changing Throttle Input: Curtis Controller

Tezzadactyl · 06-09-2022, 05:40 AM

Hi all, I fried the controller on my 95 ezgo 36v cart. I have purchased a 1205 Curtis controller. The only programming options I could select when ordering the controller was whether I wanted 36v or 48v, and 0-5k;0-5v 5-0k throttle.
My cart has the ITS system which is one of the programmable throttle systems available on this controller. I need to reprogram the throttle input to ITS as it is now set at 0-5V.
Also I would like to be able to reprogram it to 48V when this lot of batteries die.
I have the PC programming software but cannot find a cable to buy or instructions on making a cable.
Any help with my problem would be greatly appreciated.

P.S.
As this controller is set to 0-5V throttle, is there a way I can disconnect the ITS and set up something else, maybe a potentiometer or something to test the function of the controller, to ensure that it would work when I get the throttle input reprogrammed.

KRAZYMATT · 06-09-2022, 07:46 PM

PM Sent

06-09-2022, 05:40 AM	#1
Tezzadactyl Not Yet Wild Join Date: Sep 2018 Location: Australia Posts: 18	Changing Throttle Input: Curtis Controller Hi all, I fried the controller on my 95 ezgo 36v cart. I have purchased a 1205 Curtis controller. The only programming options I could select when ordering the controller was whether I wanted 36v or 48v, and 0-5k;0-5v 5-0k throttle. My cart has the ITS system which is one of the programmable throttle systems available on this controller. I need to reprogram the throttle input to ITS as it is now set at 0-5V. Also I would like to be able to reprogram it to 48V when this lot of batteries die. I have the PC programming software but cannot find a cable to buy or instructions on making a cable. Any help with my problem would be greatly appreciated. P.S. As this controller is set to 0-5V throttle, is there a way I can disconnect the ITS and set up something else, maybe a potentiometer or something to test the function of the controller, to ensure that it would work when I get the throttle input reprogrammed.

06-09-2022, 07:46 PM	#2
KRAZYMATT Gone Wild Join Date: Aug 2010 Location: Central Florida Posts: 1,506	Re: Changing Throttle Input: Curtis Controller PM Sent

Similar Threads
Thread	Forum
Testing throttle input at controller	Electric EZGO
95 Series DS 48v Throttle input/controller output testing	Electric Club Car
Curtis 1204 Throttle Input	Electric Club Car
schematic of input wiring to Curtis non dcs controller	Electric EZGO
2000 Club Car DS 48v-Throttle input for controller?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum