|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
02-18-2008, 10:12 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2008
Location: Eastern, KY
Posts: 8
|
lowering 97 ezgo
Newbie here, I have a 97 electric ezgo that Im interested in making some mods on. So far I've installed the recessed lights and a flip down rear seat. Id like to lower it some before I do a paint job. I dont want to "slam" it, just lower the stance a bit. Whats the best way to do this without dropping big bucks???
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-18-2008, 10:18 PM
|
#2 |
|
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: lowering 97 ezgo
don't know about the ezgo but on Yamaha we just relocate the shock mounts front and rear to drop it a little. welcome to BGW
|
|
|
|
|
02-18-2008, 10:28 PM
|
#3 |
|
Not Yet Wild
Join Date: Feb 2008
Location: Eastern, KY
Posts: 8
|
Re: lowering 97 ezgo
How much does that affect the ride? I've got a yamaha rhino so the cart wont be off-road, just crusin' around the streets and campgrounds.
|
|
|
|
|
02-18-2008, 10:53 PM
|
#4 |
|
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: lowering 97 ezgo
far as the ride on the Yamaha. no difference in the ride from just relocating the shock mounts but not sure on ezgo
|
|
|
|
|
02-19-2008, 07:18 PM
|
#5 |
|
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: lowering 97 ezgo
You could try to find air shocks for the front and back, gonna be tough finding the right ones though.
|
|
|
|
|
02-19-2008, 07:50 PM
|
#6 |
|
Gone Wild
Join Date: Dec 2007
Location: lake county FL
Posts: 327
|
Re: lowering 97 ezgo
jc whitney?
|
|
|
|
|
02-20-2008, 12:43 PM
|
#7 |
|
Gone Wild
Join Date: Jun 2007
Posts: 343
|
Re: lowering 97 ezgo
invert the leafs like on the old impalas itl scrape bottom
|
|
|
|
|
02-20-2008, 06:23 PM
|
#8 |
|
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: lowering 97 ezgo
Thats alot of drop lol. Around 4 inches or so?Maybe when i get my gasser going i will lower the trike.
|
|
|
|
|
02-20-2008, 08:05 PM
|
#9 |
|
Gone Wild
Join Date: Jan 2007
Posts: 731
|
Re: lowering 97 ezgo
Just make some blocks. It should be pretty simple for the front and rear.
|
|
|
|
|
02-22-2008, 07:40 PM
|
#10 |
|
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
Re: lowering 97 ezgo
I agree with dero, I will be making some blocks for my 97 also when it gets to the point of being finsihed, Just to close some fenderwheel gap. Airshocks will just raise you, They would be nice espescially for the rear when you have passengers.
Napalaz, I have actually done this to get a picture a few weeks ago, here it is. Not drivable.  |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Lowering a g2/g9? | Gas Yamaha | |||
| lowering an ez go? | Design Center | |||
Linear Mode
