07-01-2016, 10:02 AM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 1
|
Forward and reverse problem
Have been having issues lately with the f/r switch working very hard. Started out it was just a little stiff when switching from forward to reverse, and progressed to having to push really hard to move it. It now will not go forward when I move the switch. I have to lift seat and manually move the gear lever into forward position to drive it. It works for a few feet than jumps out of gear. If I switch it back to reverse it goes backwards no problem. Any thoughts?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2016, 08:06 PM | #2 |
Not Yet Wild
Join Date: Aug 2014
Location: Chagrins Falls, Ohio
Posts: 24
|
Re: Forward and reverse problem
Sounds like you might have a cable that is binding up. I would start by disconnecting the cable and verifying that it moves freely. If it doesn't, you may be able to use some spray lube to help free it up, or you might have to replace it.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Intermitent Forward Reverse Problem | Electric EZGO | |||
Melex 252 forward/reverse switch wiring problem | Melex | |||
2000 EZ Go TXT problem with forward/reverse. | Gas EZGO | |||
1980 ezgo 36 volt forward and reverse problem | Electric EZGO | |||
Forward or Reverse Problem? | Electric EZGO |