|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-27-2012, 08:11 AM | #1 |
Not Yet Wild
Join Date: Sep 2012
Location: Florida
Posts: 29
|
G2 F/R Switch is hard to move
The switch is very stiff when you shift from forward to reverse. Could someone give me some advice on what to do ? Thanks, Mike
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-27-2012, 09:38 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G2 F/R Switch is hard to move
Mike, pull back the little boots on the back side of the shifter lever, inside the engine compartment. Spray some kind of lubricant into the cable jackets, and work it back and forth, (forward and reverse).
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Hard To Turn Forward Reverse Switch | Electric EZGO | |||
Hard to shift F/R switch lever on '98 TXT | Electric EZGO | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Can I move the forward/reverse switch? | Electric EZGO |