|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-24-2012, 07:02 PM | #1 |
Not Yet Wild
Join Date: Nov 2012
Posts: 11
|
Any idea how to fix?
Bought an `03 Yamaha G22 with 6" spindle lift. Negative camber was real bad. Decided to tear into front end and replace anything bad. Found the bushing on the lower end of the driver side spindle, broken and most of the metal wedged into the cover. It's like it separated. Check out the pic. Any idea on how to fix?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-24-2012, 08:09 PM | #2 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Any idea how to fix?
Get a replacement-bushing,make sure it fits the bore and shaft properly.
|
11-24-2012, 08:43 PM | #3 |
Not Yet Wild
Join Date: Nov 2012
Posts: 11
|
Re: Any idea how to fix?
Can I pick up a new bushing from Jakes? Thanks for your reply.
|
11-24-2012, 08:44 PM | #4 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Any idea how to fix?
I would think so,If not,go thru somewhere like Grainger,or a Machine-Shop.Hope this helps.
|
11-24-2012, 09:03 PM | #5 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: Any idea how to fix?
McMasters has a lot of that stuff if Jakes does not come through.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Can anyone gve me an idea how much to ask? | Lifted Golf Carts | |||
A new idea ? | Bike & ATV Engine Swaps | |||
Any idea what this is? | Electric EZGO | |||
just an idea....... | Design Center |