|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-13-2013, 11:03 PM | #11 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 rear end
I removed the arm,tapped the hole 3/8"-16 and threaded a bolt in.works great.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-14-2013, 02:17 AM | #12 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: G2 rear end
Excellent! What gear lube you running and what did ya use to seal it up??
|
03-14-2013, 07:11 AM | #13 |
Gone Wild
Join Date: Aug 2012
Location: Colona, Illinois
Posts: 473
|
Re: G2 rear end
Tonysr1124, I'm running a G2 rearend in my G1. I put the G1 axles and tubes on the G2 differential. Bolts right up and keeps the rear centered.
|
03-14-2013, 07:21 AM | #14 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: G2 rear end
Both G1 axles are the same length? Never paid attention
|
03-14-2013, 12:14 PM | #15 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 rear end
There are different configurations of axles/tubes.I used 2 RH tubes,they are 4" longer than the left,to get the width I needed for the Marathon.I sealed the threads of the bolt with some RTV.Use a gasket for the housing-seam,it also acts as a shim.I run 75-90 Synthetic.I did learn this,Don't run it on an open swing-arm like an EZ-Go,the RH-housing can't take the flex.G2 swing-arms are a closed design,and the axle sits on top.I snapped the RH gear-case where the axle bolts to it.I JB-Welded the snot out of it,and added an axle-truss,it broke again.
|
03-14-2013, 06:20 PM | #16 | |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: G2 rear end
Quote:
Do you have a line on new gaskets for the case? I will definitely need one! |
|
03-14-2013, 06:33 PM | #17 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 rear end
Check with Smallblock450sl,he sent me one with the case-half i got from him.
|
03-14-2013, 06:43 PM | #18 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: G2 rear end
Dave is the "go to" man!!
|
03-14-2013, 07:16 PM | #19 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 rear end
Definitely!!
|
03-14-2013, 07:25 PM | #20 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: G2 rear end
I cant wait until I get this donor quad home Saturday for my build!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ez go marathon 4"lift rear spring suggestions for rear seat kit. | Design Center | |||
CLUB CAR (GAS) REAR AXLE swap.....Are the gas and electric rear axles interchangeable | Gas Club Car | |||
g9 with 4" lift, What size rear tires fit on rear with chains? | Gas Yamaha | |||
Are the rear shocks really needed with HD rear springs? | Electric EZGO | |||
Spicer dana rear axle from an easy go. rear frame included. | Golf Carts and Parts |