|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-29-2013, 11:09 PM | #1 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
removing primary clutch help please
I cannot get my primary clutch off my cart for a rebuild ..I removed my clutch cover and theres no middle bolt on the middle shaft its just flush with spider on shaft ..is there suppose to be a bolt or not ..how do I get the primary clutch off please help if a conversation will help please call me Eric 586-292-2979 please someone help me tx
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2013, 01:15 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: removing primary clutch help please
Eric, there is a special puller made for that. Usually hard to do with out it.
|
06-30-2013, 01:50 AM | #3 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: removing primary clutch help please
since there is no bolt on end of primary is it just stuck on by the taper ..is that why I need a puller
|
06-30-2013, 02:01 AM | #4 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: removing primary clutch help please
I looked up the clutch puller on ebay and looks like a long bolt with threads at top and smooth downward ..the problem I have is there is no hole to install this rod.. the end shaft on my primary is solid no bolt just solid to spider ..now how do I get this thing off ??
|
06-30-2013, 02:07 AM | #5 |
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: removing primary clutch help please
can we see a pic of this?....
|
06-30-2013, 02:13 AM | #6 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: removing primary clutch help please
yes I will get you one right now thank you give me a minute thanks soo much
|
06-30-2013, 02:28 AM | #7 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: removing primary clutch help please
[ATTACH]87493[/ATTACHSANY0005.jpg can you see this it flush ???
|
06-30-2013, 02:31 AM | #8 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: removing primary clutch help please
I tried using a easy out to get off ..no Iam lost ..no luck then ground a slot for a inpact screw driver ..no luck
|
06-30-2013, 02:34 AM | #9 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: removing primary clutch help please
theres no hole for the puller ..in the middle ??????
|
06-30-2013, 06:06 AM | #10 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: removing primary clutch help please
wondering if this is heald on by the crankshaft taper if so please let me know if I can heat it up to remove ..please help asap tx Eric 586-292-2979 please call if possible tx
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
Getting primary clutch apart? | Gas Club Car | |||
removing the primary drive | Gas Columbia ParCar | |||
Problem removing primary clutch and flywheel on 1984 G1 | Gas Yamaha | |||
G9 Primary Clutch | Gas Yamaha |