|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-30-2013, 08:54 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2011
Posts: 6
|
clutch
want a better clutch for trail riding ant suggestions thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-03-2013, 09:08 PM
|
#2 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: clutch
Check out the ones cart parts plus has for starters, there are some good threads on them mostly in the big block section. You need to know what shaft you have, mostly stock carts use taper shaft clutch with the generator pulley. Big blocks use 1" key shaft, but you can adapt a taper clutch onto a 1" shaft with the adapter from CPP. I did that on my clone and used the stock clutch. You can get other clutches for taper without the pulley as most other cvt equipped vehicles don't have a pulley. I plan to buy a clutch sometime soon mine is just about shot, was looking at the powerbloc.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
| Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
| using hand clutch as foot clutch | Design Center | |||
| stock ezgo clutch and yamaha clutch | Big Block Talk! | |||
Linear Mode
