|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-26-2010, 12:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
|
Programming alltrax controller
Trying to program dcx500 controller but when i go into pro software message comes up and says cannot locate motor controller.
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-26-2010, 12:32 PM
|
#2 |
|
resident idiot
 Join Date: Apr 2010
Posts: 582
|
Re: Programming alltrax controller
What kind of cart is this controller on? Are you bench programming(out of cart) or programming in-cart? The green LED MUST be illuminated BEFORE opening ControllerPRO.
|
|
|
|
|
11-26-2010, 12:39 PM
|
#3 | |
|
Not Yet Wild
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
|
Re: Programming alltrax controller
Quote:
|
|
|
|
|
|
11-26-2010, 12:41 PM
|
#4 | |
|
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Programming alltrax controller
Quote:
|
|
|
|
|
|
11-26-2010, 12:52 PM
|
#5 | |
|
Not Yet Wild
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
|
Re: Programming alltrax controller
Quote:
 |
|
|
|
|
|
11-26-2010, 01:00 PM
|
#6 |
|
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Programming alltrax controller
Do you have the latest build of ControllerPRO (build 39)? This is what I did to program my DCX.
1. Plug in controller to computer. 2. Turn key switch to ON position 3. Put direction selector to FWD position. 4. Verify solid green light is ON. 5. Open ControllerPRO 6. Make modifications and so on... If none of this helps I am sure one of the experts will chime in. |
|
|
|
|
11-26-2010, 01:04 PM
|
#7 | |
|
Not Yet Wild
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
|
Re: Programming alltrax controller
Quote:
|
|
|
|
|
|
11-26-2010, 01:05 PM
|
#8 |
|
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Programming alltrax controller
That reminds me, do you have the driver installed for the USB-Serial cable you are using?
No prob. |
|
|
|
|
12-06-2010, 03:05 PM
|
#9 |
|
Not Yet Wild
Join Date: Nov 2009
Location: Bayou State
Posts: 19
|
Re: Programming alltrax controller
What windows are you running on your computer? You need Windows XP and the Driver for the cable from computer to the controller needs to be installed. ( after connecting did you click refresh?) Go to Altrax website and read up. http://www.alltraxinc.com/Products_ControllerPro.html
Jack |
|
|
|
|
12-06-2010, 03:44 PM
|
#10 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,934
|
Re: Programming alltrax controller
I was not able to run my cable on my 64bit system, so I have the old computer set aside for programming.... hope this helps....
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Programming Curtis Controller | Electric golf carts | |||
| Alltrax Programming Question | Electric EZGO | |||
| Bench programming alltrax | Electric EZGO | |||
| what is the best programming for an alltrax controller | Electric EZGO | |||
| Alltrax axe programming | Electric EZGO | |||
Linear Mode
