lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-04-2009, 11:02 AM   #1
dej5320
Not Yet Wild
 
Join Date: Nov 2009
Posts: 2
Default Non-DCS Troubleshooting help

I followed the diagnostic sticky from this forum, and everything checked out until I got here...

"CHECKING CONTROLLER OUTPUT Connect (-) probe to M- terminal.
Connect (+) probe to B+ terminal.
The reading should indicate approx. 0 volts."

I am getting battery voltage here. Any suggestions for the next step?

Thanks
dej5320 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
troubleshooting Electric golf carts
Troubleshooting Help 03 TXT Electric EZGO
Controller troubleshooting Electric EZGO
95 EZ- GO troubleshooting Electric EZGO


All times are GMT -5. The time now is 11:53 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.