New Battery Charger Plug Install

chefdannny · 07-24-2009, 09:50 AM

Im putting a new battery / charger plugs onto new cables.
How do i put the wires into the metal sleeves?
Do i crimp it or sodder them in.
Any advice would be great, it came with no directions.

rusty1 · 07-24-2009, 10:23 AM

i crimp them just make sure it is a good crimp and the wire ans inside of connector is clean.

dougmcp · 07-24-2009, 01:32 PM

Quote:

Do i crimp it or sodder them in.

Either or both is fine. The current load is less than 25amps and heat buildup is usually not an issue like the 200 amps across the battery cables.

07-24-2009, 09:50 AM	#1
chefdannny Not Yet Wild Join Date: Jul 2009 Location: Jersey Posts: 14	New Battery Charger Plug Install Im putting a new battery / charger plugs onto new cables. How do i put the wires into the metal sleeves? Do i crimp it or sodder them in. Any advice would be great, it came with no directions.

07-24-2009, 10:23 AM	#2
rusty1 Gone Wild Join Date: Mar 2009 Location: cochran georgia Posts: 300	Re: New Battery Charger Plug Install i crimp them just make sure it is a good crimp and the wire ans inside of connector is clean.

Similar Threads
Thread	Forum
change plug on Powerwise charger from new style to SB50?	Electric EZGO
Battery died after CD player install..help	Gas EZGO
install battery gage	Electric EZGO
install battery gage 2006 ezgo golf cart	Electric golf carts
how to test battery charger without a buggy to plug in into	Electric golf carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum