|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-29-2008, 11:51 AM | #1 |
Not Yet Wild
Join Date: Nov 2007
Posts: 8
|
yamaha g8 alltrax 4844
I am trying to put a alltrax 4844 in a yamaha g8 and i am no sure what wire's to hook to the controller there are like 6 wire's going in to the controller and i only need 3 so what do you do with the rest off them? i have the wiring diagram for the g8 but i can't read the color code on them so i am just looking for some help with this.
kevin |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-14-2009, 05:34 AM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: yamaha g8 alltrax 4844
Your going to HAVE to use all the connections on the controller. You need B+, B-, M-, MAYBE A2 depending on the controller. Those are the large wires. THe control wires you have KSI (key switch) 2 throttle and half speed reverse.
Take a look at this schematic and see if it fits your cart. http://www.alltraxinc.com/files/Doc1...6-wire-dia.pdf |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax AXE 4855 | Electric EZGO | |||
New Alltrax in a G19 | Electric Yamaha | |||
Alltrax Controller | Golf Carts and Parts | |||
EMP and Alltrax Combo | Electric EZGO | |||
Has anyone used a Alltrax in a G19 | Electric Yamaha |