1993 Gas Club Car Parts?

[bkwildlifecntrl]

Well I bought my wife this used golf cart to putt putt around our farm with the grand babies. I have change fuel lines pump filter and cart runs great when it wants to. recently we have started having issue with it going forward and reverse. Sometimes it wants to go but most the time it takes forever to start going. In maintenance mode it revs up pretty good. It is only when switched to forward and reverse you push the petal and crickets. after you continue playing with the switch under your feet a few hundred times it may or may not go. Kind of the luck of the day deal.

Everything i have read has pointed me too the forward/reverse switch.

So on to my next issue finding the correct switch. All the parts sheets i see don't have a switch like this so I don't know it the switch is missing stuff or not. I have added multiple pictures hopefully it will help. Also having the same problem finding the exact seat to replace the old one on it for the wife.

Any help would be greatly appreciated and thank you all in advanced

[bkwildlifecntrl]

Some more pictures

[Mooncarter]

Can you describe the problem in a bit more detail? Are you saying a chirping sound?

[lockman1]

Welcome to BGW bk!

Yep... your on the right track!
The actuator arm for the inside microswitch is severely bent, you can "try" to straighten it,
but it'd be advisable to just go ahead and replace both of them, they're cheap!

Revolution Golf Cars has them!

https://www.revolutiongolfcars.com/p...ub-car-1014808

https://www.revolutiongolfcars.com/p...ub-car-1014807

[Mooncarter]

Good catch Lock!

[lockman1]

Originally Posted by Mooncarter

Good catch Lock!

I like pictures!

[Mooncarter]

Originally Posted by lockman1

I like pictures!

Well he said "crickets." I suppose that must mean something other than what I thought.

Sorry BKwild I'm not (usually) this dense.

[lockman1]

it happens!

Another thing I noticed in the pics, the snubber is missing!
(pics from my cart)

Snubber1.jpg

Snubber 3.jpg

on a 93... they're not very easy to install because the snubber mount is welded on the engine cradle, but it can be done!

I can't find them on Revolution's site, but I'm sure he has them, you'd probably have to email, or call David for that!

[CP241]

Yeah the snubber sucks to replace on those. I bought one fke my 93 and gave up shortly into the venture, and used fairtax's trick and used a heater hose and heavy duty zip tie works great

[CP241]

Also the switch that's bent only works the reverse buzzer. It's not going to stop the cart from running. I usually unplug it completely on mine because I dont like the buzzer.

The one on the end of the shaft is the one that will stop the cart from running. You can just jump the wires together and bypass its see if that helps. If so it may be stuck internally. I believe it's the black and green wire you jump together going from memory, but theres a wire diagram in the sticky section you can confirm.