|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-28-2013, 11:07 AM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 5
|
1984 EZ-GO 244cc Robin Engine Help Tuning
I bought a new pick-up coil or pulsar and a new carb. For the Pulsar should I mount it in the same spot or should it be adjusted. So for the carb, is there a base setting that I should start at? And bout the only way to tune the carb is by the sound of the engine? And the auto oiler just put it were it was on the cable or how does that get adjusted?
Thanks For All The Help On This Rebuild This Site Is Awesome!!!!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-29-2013, 05:18 AM | #2 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 1984 EZ-GO 244cc Robin Engine Help Tuning
Pulser plate screws should be centered in the slots in the plate. Look close there may be stamped timing marks on the plate and case or maybe not Carb seat the neddle lightly then back off 1 turn and you'll be close. LOCK the nut so it don't back off. OILER ??? get rid of it and mix the gas at 128:1 or 1oz per gallon if the pump fails so does your engine
LOU |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
robin 244cc engine spec's | Gas EZGO | |||
Robin 244cc engine | Gas EZGO | |||
WANTED: Robin 244cc engine | Golf Carts and Parts | |||
1984 EZ-GO 244cc Robin Engine Need Torque Spec's | Gas EZGO | |||
3 wheel ez go 244cc robin engine no spark | Gas EZGO |