Alltrax XCT 500 Install 2015 Club Car Precedent Question

[GCDD]

I have hooked up all the wiring but have a red wire and black wire that runs to the charging system. Do I hook the black wire to the B- on the controller and the red wire to the positive post on the solenoid. Also, I have attached a picture of my wiring. Does anyone see anything concerning? Thank you.

[NoleFan4Ever]

Yes for the charge wire terminations (Red = battery side solenoid large post and Black = B- at controller.)

On your solenoid, the Regen Diode and wires are correct, but you need a suppression diode for your small posts. Your supplier should have supplied you one when ordering, but if not, you need it.

Be sure your large posts have the high load cables flush onto the solenoid and anything else above in order of size/load.

See here... http://www.buggiesgonewild.com/elect...ml#post1557532

[GCDD]

Thank you for your reply. I appreciate it.