Requiring Curtis 1206 without A2

yurtle · 01-18-2019, 11:40 AM

Quote:

Originally Posted by bobbycason

Are you talking about the smaller pins/wires labeled 1 thru 4?

Yes. Stock has a Molex plug with pins 1 - 6, only four of which are used. ITS is 1 and two, 3 is 1/2 speed, and 4 is power.

Alltrax has four spade connectors, 1 - 4. Pin 1 is power, 2 and 3 are ITS, and 4 is 1/2 speed.

bobbycason · 01-18-2019, 12:23 PM

Quote:

Originally Posted by yurtle

Yes. Stock has a Molex plug with pins 1 - 6, only four of which are used. ITS is 1 and two, 3 is 1/2 speed, and 4 is power.

Alltrax has four spade connectors, 1 - 4. Pin 1 is power, 2 and 3 are ITS, and 4 is 1/2 speed.

That's what I thinking, just wanted to clarify. I never noticed that either when I was working on mine.

klargo100 · 01-19-2019, 10:04 PM

I think I wired it up as your diagram says. I’m at least now getting the solenoid to click but the cart doesn’t move. Could I be missing something else?

Sent from my iPhone using Tapatalk

01-19-2019, 10:04 PM	#13
klargo100 Not Yet Wild Join Date: Dec 2018 Posts: 8	Re: Requiring Curtis 1206 without A2 I think I wired it up as your diagram says. I’m at least now getting the solenoid to click but the cart doesn’t move. Could I be missing something else? Sent from my iPhone using Tapatalk
klargo100 Not Yet Wild Join Date: Dec 2018 Posts: 8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Curtis 1206 275 Amp vs 350 Amp	Electric EZGO
Connector for Curtis 1206-03 ?	Electric EZGO
How do I get inside a curtis 1206?	Electric EZGO
Curtis 1206 Controller	Electric EZGO
Curtis 1206 test ?	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum