|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-29-2019, 09:48 AM | #21 |
Not Yet Wild
Join Date: Apr 2019
Posts: 8
|
Re: Upgrading drive system
Dwalls did you get the jumper wires installed this weekend?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-29-2019, 10:44 PM | #22 |
Gone Wild
Join Date: Apr 2019
Location: North Alabama
Posts: 165
|
Re: Upgrading drive system
No, I'm sorry but I didn't get to it this weekend, too many things going on at the same time and one of the wife's close friends in the hospital not doing good. I will keep you posted on the progress. I did get the new controller in but I am not going to install it before I change the wires out and repeat the same test again. I got the new ends for the cables, heatshrink and have plenty of cable, just short on time. I know, nothing but excuses and they don't help you a bit. I promise that I'll post back here when it happens. |
05-04-2019, 12:48 PM | #23 |
Gone Wild
Join Date: Apr 2019
Location: North Alabama
Posts: 165
|
Re: Upgrading drive system
Update, I've started changing out the cables in the cart this morning and as many of you already know, it didn't make much, if any improvement other than I know that I have good cables on the cart now.
Battery voltage was 38.48 On flat ground was getting 13mph and once saw 14 but it was brief Up hill on driveway it was mostly 8mph and saw 9 for a second. Now to install the new alltrax 500 that I got from ScottyB |
05-04-2019, 09:27 PM | #24 |
Gone Wild
Join Date: Apr 2019
Location: North Alabama
Posts: 165
|
Re: Upgrading drive system
Pictures from today, Trooper is checking out the motor for me, got to love good help.
|
05-08-2019, 09:58 PM | #25 |
Not Yet Wild
Join Date: Apr 2019
Posts: 8
|
Re: Upgrading drive system
Hey Dwalls the alltrax 500 you are going to install. Are all your other components stock?
|
05-09-2019, 08:07 AM | #26 | |
Gone Wild
Join Date: Apr 2019
Location: North Alabama
Posts: 165
|
Re: Upgrading drive system
Quote:
Any and all suggestions on motors are appreciated. Live in north Alabama and there are some hills so I don't think that a speed motor will work best but I would like to be in the mid 20's with torque if possible, minimal lift is desired so I don't want to get the speed with larger tires and hurt myself on going uphill. Not talking about climbing extreme hills with this but it drops from 13mph on flat to 8mph up my driveway to the shop. |
|
05-09-2019, 08:35 AM | #27 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Upgrading drive system
Nice job on those cables
|
05-09-2019, 09:13 AM | #28 |
Gone Wild
Join Date: Apr 2019
Location: North Alabama
Posts: 165
|
Re: Upgrading drive system
|
05-19-2019, 10:55 AM | #29 |
Not Yet Wild
Join Date: Apr 2019
Posts: 8
|
Re: Upgrading drive system
What would you guys suggest for me to upgrade first? I have all stock components.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
what drive system is this? | Electric EZGO | |||
Trouble with DS drive system. | Electric Club Car | |||
Yamaha Drive - Upgrading Motor & Controller | Electric Yamaha | |||
ez-go PDS drive system intermittent slow drive | Electric EZGO | |||
Upgrading 05 ezgo txt pds drive 36v to 48v | Extreme DC! |