2011 48v EZGO RXV

Nikkidix7 · 06-18-2019, 07:59 PM

I had the resistor driver side hooked up to the wrong lug on the solenoid. Changed it over to the one suggested brake problem is better but cart still starts slow and then accelerates. Still think I have a problem with the brake circuit? Do any of you have any tests I can carry out?

rngilliland · 06-18-2019, 08:14 PM

The slow start may just be the way your controller is programed. When I swapped from a Danaher controller programed for the golf course to a Curtis with freedom programing, I noticed a big increase in initial acceleration.

Nikkidix7 · 06-18-2019, 08:34 PM

Thank you so much! Cart accelerates like a champ! I will take it out for a longer test run tomorrow and report back.

BBBHC · 06-19-2019, 06:50 AM

Well done Nikkidix7! Congratulations on getting it running!

Nikkidix7 · 06-19-2019, 03:51 PM

Thanks BBBHC!

Nikkidix7 · 06-20-2019, 09:15 AM

Guys,

Took the car out for a longer run last night, cart runs well but i still have a slight grinding noise coming from rear axle at slow speed? I check the wheel bearings and everything seems ok with them. This is my first RXV cart so im not sure if this is normal sound which is getting extenuated by the fact the body is off or im missing something.

Thanks in advance!

06-18-2019, 07:59 PM	#21
Nikkidix7 Not Yet Wild Join Date: Apr 2019 Location: Atlanta Posts: 16	Re: 2011 48v EZGO RXV I had the resistor driver side hooked up to the wrong lug on the solenoid. Changed it over to the one suggested brake problem is better but cart still starts slow and then accelerates. Still think I have a problem with the brake circuit? Do any of you have any tests I can carry out?

06-18-2019, 08:14 PM	#22
rngilliland Gone Wild Join Date: Feb 2016 Posts: 229	Re: 2011 48v EZGO RXV The slow start may just be the way your controller is programed. When I swapped from a Danaher controller programed for the golf course to a Curtis with freedom programing, I noticed a big increase in initial acceleration.
rngilliland Gone Wild Join Date: Feb 2016 Posts: 229

06-18-2019, 08:34 PM	#23
Nikkidix7 Not Yet Wild Join Date: Apr 2019 Location: Atlanta Posts: 16	Re: 2011 48v EZGO RXV Thank you so much! Cart accelerates like a champ! I will take it out for a longer test run tomorrow and report back.

06-19-2019, 06:50 AM	#24
BBBHC Gone Wild Join Date: Jul 2018 Location: Central Ohio Posts: 1,720	Re: 2011 48v EZGO RXV Well done Nikkidix7! Congratulations on getting it running!

06-19-2019, 03:51 PM	#25
Nikkidix7 Not Yet Wild Join Date: Apr 2019 Location: Atlanta Posts: 16	Re: 2011 48v EZGO RXV Thanks BBBHC!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-20-2019, 09:15 AM	#26
Nikkidix7 Not Yet Wild Join Date: Apr 2019 Location: Atlanta Posts: 16	Re: 2011 48v EZGO RXV Guys, Took the car out for a longer run last night, cart runs well but i still have a slight grinding noise coming from rear axle at slow speed? I check the wheel bearings and everything seems ok with them. This is my first RXV cart so im not sure if this is normal sound which is getting extenuated by the fact the body is off or im missing something. Thanks in advance!

Similar Threads
Thread	Forum
2011 ezgo st2	Gas EZGO
2011 ezgo txt	Electric EZGO
2011 ezgo gas txt	Gas EZGO
2011 ezgo no-go	Electric EZGO