|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-18-2011, 11:32 PM | #1 |
Not Yet Wild
Join Date: Mar 2010
Posts: 22
|
Motor spline rubber bumper
Anyone ever forgot to remove the rubber bumper from the old motor and put it in the new motor? Any damage as a result? I plan on pulling the motor back out and fixing it but I'm going to use the cart a little this weekend and don't have time to pull the motor first and I would hate to damage anything because of my oversight.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-18-2011, 11:43 PM | #2 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,286
|
Re: Motor spline rubber bumper
C'mon, you know how easy the motor comes out now, get up in there and get it done. 30 minutes, tops!
|
02-19-2011, 12:02 AM | #3 |
Not Yet Wild
Join Date: Mar 2010
Posts: 22
|
Re: Motor spline rubber bumper
No doubt it is easy, I just didn't want to pull the bed off and that access panel. But your right, I don't need to take any chances on damaging that new motor or shaft.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Replace 19 spline coupler on Advanced DC motor? | Electric EZGO | |||
Motor Bumper Cement | Electric Club Car | |||
Could it be the motor bumper | Electric Club Car | |||
16 spline motor | Electric Club Car | |||
What Spline Motor In My 83 CC | Electric Club Car |