Starting issue

1989Marathon · 10-03-2015, 09:27 PM

Quote:

Originally Posted by smallblock450sl

I try to help because I've done this for a long time and try to help when I can.

I think that's why we all enjoy being here. I hope I didn't step on any toes here.

nitro1 · 10-04-2015, 07:58 AM

A1 & F2 with pedal pushed i get 12v

nitro1 · 10-04-2015, 09:07 AM

Thanks to everyone for the great help u gave me, it turned out like u said (starter) know since the one i took off was no good is it fixable ? So i have it for another cart or if the one i put on goes bad ?

Mike Mac · 10-04-2015, 09:28 AM

Personally I would fix that one. Usually they only need brushes. I posted pictures of mine in "The G8 club" on page 943, post 9424, if you care to look!!

nitro1 · 10-04-2015, 12:38 PM

Yup i took off the rubber and they are pushed in now its running rough but ill be giving it a tune up and finding why its blowing fuses

nitro1 · 11-01-2015, 06:22 PM

Just a update I had changed the wiring harness and helped a little with the hesitation my motor was having, I was doing some test on the solenoid and my screw driver touched both post and ran fine does that mean my solenoid is bad ???

10-04-2015, 07:58 AM	#22
nitro1 Gone Wild Join Date: May 2010 Location: OHIO Posts: 1,517	Re: Starting issue A1 & F2 with pedal pushed i get 12v

10-04-2015, 09:07 AM	#23
nitro1 Gone Wild Join Date: May 2010 Location: OHIO Posts: 1,517	Re: Starting issue Thanks to everyone for the great help u gave me, it turned out like u said (starter) know since the one i took off was no good is it fixable ? So i have it for another cart or if the one i put on goes bad ?

10-04-2015, 09:28 AM	#24
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: Starting issue Personally I would fix that one. Usually they only need brushes. I posted pictures of mine in "The G8 club" on page 943, post 9424, if you care to look!!

10-04-2015, 12:38 PM	#25
nitro1 Gone Wild Join Date: May 2010 Location: OHIO Posts: 1,517	Re: Starting issue Yup i took off the rubber and they are pushed in now its running rough but ill be giving it a tune up and finding why its blowing fuses

11-01-2015, 06:22 PM	#26
nitro1 Gone Wild Join Date: May 2010 Location: OHIO Posts: 1,517	Re: Starting issue Just a update I had changed the wiring harness and helped a little with the hesitation my motor was having, I was doing some test on the solenoid and my screw driver touched both post and ran fine does that mean my solenoid is bad ???

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
89 gas par car starting issue	Gas Columbia ParCar
Starting issue g2	Gas Yamaha
g9 starting issue	Gas Yamaha
starting issue	Gas Club Car
Starting issue!	Gas Club Car